UCI_ElevationScanStabilization

UCI_ElevationScanStabilization

Overview

This type is used to define whether the new elevation center is referenced by the body or center altitude. The center of the volume can be stabilized either relative to the boresight of the antenna installation on the aircraft (BODY) or relative to a location defined by the Elevation Scan Center Altitude Range Pair (CENTER_ALTITUDE). In either case, the radar will position the volume alignment relative to the aircraft’s current pitch.

Static Methods

static UCI_ElevationScanStabilization BODY()

Returns a UCI_ElevationScanStabilization with the BODY reference type.

static UCI_ElevationScanStabilization CENTER_ALTITUDE()

Returns a UCI_ElevationScanStabilization with the CENTER_ALTITUDE reference type.