Flight Test

Mover Creator along with Warlock give users the opportunity to test the vehicle they have designed. This is done through the Flight Test page. There are two sections to the Flight Test page:

../_images/flight_test_page.png

Initial Settings

In this section the user sets the desired starting location, heading and speed of the vehicle. Specifically, the user can change the following starting parameters:

  • Latitude

  • Longitude

  • Altitude

  • Heading

  • Speed

Once the user has the initial conditions set, they can launch Warlock by clicking the Perform Flight Test button. Warlock then loads up a simple scenario containing the vehicle designed by the user.

../_images/flight_test_warlock.png

The user should then press the ‘play’ button at the top of the Warlock application to observe the vehicle in flight. Refer to the Warlock documentation for more details about options available in Warlock.

Navigation From the Flight Test Page

From this page the user can navigate to one of the following pages via the tabs or by clicking the Previous button.